Ares™ Builder
* Nicht alle abgebildeten Anhänge sind im Lieferumfang enthalten. Lesen Sie die Konfigurationsbeschreibungen, um zu sehen, was in jeder Konfiguration enthalten ist und was nicht.
Wenn Sie einen 4-Post 80" Ares™ kaufen, beachten Sie bitte Folgendes: Der Logo Plate Crossmember begrenzt die Trolleyhöhe und beeinträchtigt den nutzbaren Platz für die Platzierung des J-Cups. Wir raten Personen, beim Kniebeugen mit den Trolleys über der Stange vorsichtig zu sein, wenn sie die Hantel aus der Halterung nehmen und wieder auf die Halterung legen. *
Hinweis zu Proposition 65 (Kalifornien)
Verfügbarkeit für Abholungen konnte nicht geladen werden
OVERVIEW
Der Ares™ Cable Attachment ist ein voll integrierter, funktionaler Trainer und Latzuggerät, der an Ihrem vorhandenen PR-4000- oder PR-5000-Power-Rack befestigt werden kann. Dies spart viel Platz, da es eine Menge mehr Vielseitigkeit und Kabelübungen in das Rack bringt und dabei fast die gesamte ursprüngliche Funktionalität beibehält. Der Ares™ verfügt über zwei Gewichtsstapel mit jeweils 260 Pfund (mit der Option, Aufrüsten auf 310 Pfund pro Stapel ), die Sie für einseitige Übungen verwenden können. Oder verbinden Sie beide Stapel miteinander für beidseitige Bewegungen, die schwerere Gewichte erfordern, wie z. B. Latzüge. Das zum Patent angemeldete Ares™ verfügt über Trolleys mit einer glatten Kunststoffauskleidung, die sich mit einer Hand leicht nach oben und unten verstellen lässt.
Die vorderen Rollen sind um 180 Grad schwenkbar, um vielseitige Bewegungen zu ermöglichen und außerhalb des Racks zu funktionieren. Warmgewalzte Stahlplatten mit bearbeiteter Oberfläche gewährleisten gleichbleibende und langlebige Gewichte, in die der magnetisierte Stift reibungslos hineingleitet. Eine metallisch schwarz lackierte Abdeckung mit einem vertieften REP-Logo aus Edelstahl verfügt über lasergeschnittene Fenster, durch die man die Gewichte in Bewegung sehen kann. Durch das Verhältnis von 2:1 fühlen sich 100 Pfund wie 50 Pfund an, ideal für funktionelles Training. Der Ares™ wird mit einer Fußplatte zum Abstützen bei niedrigen Ruderzügen, vier mikroverstellbaren 2,5-Pfund-Gewichten, D-Griffen (nicht abgebildet), einer geriffelten Latzugstange und Low-Row-Stange aus Chrom und einer Verbindungsbanane geliefert. Organisieren Sie Ihr Fitnessstudio noch weiter mit unseren Off-Rack- oder Wing-Add-on-Aufbewahrungsoptionen. Wenn Ares™ der Kriegsgott ist, ist dies das Zubehör, um Sie dafür zu trainieren.
PRODUCT DIMENSIONS
-
Weight965lbs
-
Pulley Ratio2:1
-
Trolleys Weight Capacity450lbs
-
Cables Weight Capacity450lbs
-
Weight Plates Tolerance3%
-
Cable Travel96" (93" rack) & 72" (80" rack)
-
Added Height1.2"
-
Added WidthPR-4000: 1.6" & PR-5000: 5.0"
-
Added Depth6.0" Front of Rack
PRODUCT FEATURES
-
PATENT-PENDING DESIGN
Light and smooth trolleys with a knurled handle and oversized pop-pin are easy to move with one hand, but strong enough to handle heavy weight. They're lined with a special plastic to protect your upright. -
PULLEYS AND CABLES
The Ares™ features more than 30 aluminum pulleys with custom retainers to keep the cables on track. The front pulleys have a 180-degree swivel for versatility and the ability to work outside the rack. -
WEIGHT STACKS
Two 260lbs weight stacks made from hot-rolled steel have a 2:1 ratio (100lbs feels like 50lbs), ideal for functional training. Upgrade the stacks to 310lbs or 620lbs total. -
LAT AND LOW ROW
The Lat and Low row can be used for unilateral work or combine both weight stacks via the “banana attachment” for the full effective weight of 260lbs. -
ATTACHMENTS AND ADDITIONS
The Ares™ comes with Urethane D handles , a knurled hard-chrome lat pull down bar and low row bar, footplate for low rows, a connector banana, and four 2.5lbs weights for micro-adjustments. Note: Please see FAQ for requirements on compatible attachments. -
COMPATIBILITY
The Ares™ is compatible with the PR-4000 6-Post 24” + 16”, 30” + 16”, 41” + 16”, 16” + 16” / PR-4000 4-Post 16” / PR-5000 6-Post 30” + 16”, 41” + 16”, 16” + 16” / PR-5000 4-Post 16”. The Ares is available for both 80” and 93” racks.
MEDIA GALLERY
VIDEOS
- HOW WE BUILT THE ARES™ CABLE ATTACHMENT
- HOW TO BUILD THE ARES™ CABLE ATTACHMENT
HOW WE BUILT THE ARES™ CABLE ATTACHMENT
The Ares™ Cable Attachment is the newest innovation in our rack attachment ecosystem. Designed in Denver by our in-house team of engineers, the Ares™ will take your power rack to the next level. Find out why and how we built it. Need help with assembly? Take a look at the Ares™ Assembly Instructions.
HOW TO BUILD THE ARES™ CABLE ATTACHMENT
Follow along as Dan and Matt walk you through every step as they assemble an Ares™ Cable Attachment. Need extra guidance? Take a look at the Ares™ Assembly Instructions.
CUSTOMER STORIES
FAQS
-
Which power racks are compatible with the Ares™?
Only the PR-4000 and PR-5000 series power racks are compatible with the Ares™. For the PR-4000, you will need to upgrade to the 16” cross-members with vertical holes. For PR-4000 rack owners - a new set of the upgraded 16" PR-4000 crossmembers will be included until October of 2022. Please reach out to Support via our Contact Us form with any questions, comments, or concerns. PR-5000 owners should verify they own the V2 PR-5000 power rack, which has 1” holes along the upright, whereas V1 has alternating 5/8” holes and 1” holes.
The Ares™ is not compatible with any flat-footed rack configuration: OMNI, Apollo, or HR-5000 V1.
-
What rack configurations will the Ares™ fit on?
* The PR-4000 6-post rack with 16", 24", 30", or 41" cross-members in the front with 16" cross-members in the back, or two sets of 16" cross-members to save space.
* The PR-4000 4-post rack with only the 16" cross-members.
* The PR-5000 6-post rack with 16", 30", or 41" cross-members in the front with 16" cross-members in the back, or two sets of 16" cross-members to save space.
* The PR-5000 4-post rack with only the 16” cross-members.
-
How do I know if I have a V1 PR-5000?
PR-5000 V1’s have alternation 1” and 5/8” holes along the upright and is not compatible with the Ares™. The V1 was discontinued in 2020.
-
What is the weight capacity on the trolley and cables?
The weight capacity for both the cable and the trolleys is 450lbs.
-
What is the ratio of the pulleys and the cable travel?
The pulleys are a 2:1 ratio. A 93” rack has 96” of cable travel and an 80” has 72” of cable travel. The depth of the rack does not affect cable travel.
-
How much do the weight stacks weigh?
The weight stacks are 260lbs each with the option to upgrade them to 310lbs each. They also come with labels that tell you how the weight stacks feel for ease of use. No math required.
-
Do I need to bolt the rack down with the Ares™?
We always recommend bolting the rack down for safety. With the 4-Post Ares™ Attachment, we recommend using our Front Foot Extensions .
-
What if I cut out holes in my mats for the uprights?
You will also need to clear a section in the back so the Ares™ components can rest on the floor. We also touch on this in the Ares™ Engineering Video.
-
If I eventually change the depth of my rack, will my Ares™ still work?
You will need to change your cable length if you change the depth of your rack. Cable packages will be sold separately so you can upgrade.
-
Will there be a plate-loaded version of the Ares™?
We are working on quite a few cable attachment options, including plate-loaded and selectorized, but they may not look exactly like the Ares™. We do not currently have any public release dates for these new products.
-
Do I need a specific color of uprights?
Not necessarily. While the matte black finish does have some texture, the trolleys will still work just fine. But the trolley will work best on our other finishes.
-
Does the Ares™ work with the Rear Base Stabilizer?
No, the Ares™ completely replaces the Rear Base Stabilizer.
-
Can I use the ISO Arms?
Yes, and we demonstrate how to integrate the Ares™ and the ISO Arms in the Ares™ Engineering Video.
-
Can I use the Belt Squat Attachment on the low pulleys?
Yes, and we demonstrate how to use the Belt Squat Attachment in the Ares™ Engineering Video.
-
Are any pull-up bars not compatible with the Ares™?
The multi-grip pull-up bar is not compatible with the 16” + 16” cross-member configuration (of the PR-4000 and PR-5000). The globe grip is not compatible with the 41” front cross-member + 16” back cross-member configuration of the PR-(4000 and PR-5000). The Globe Grip was updated in 2020. The older version will not work with any configuration of the Ares™.
*If you purchase the Globe Grip there will be some rubbing with the cables.*
*The 4-post power rack compatible with the Ares™ does not include a pull-up bar that is compatible with the configuration (...yet).*
-
Is the Ares™ compatible with other brands of power racks?
No. The Ares™ was designed for REP brand PR-4000 and PR-5000 series racks. Even if other racks have a 47” rack, there is no standardization across hole patterns, metric measurements, height, thickness of powdercoat, etc. We will not guarantee the fit of an Ares™ on anything other than a REP rack.
-
How does the Ares™ ship?
The Ares™ ships LTL Freight. A semitrailer will arrive with a wooden crate, and inside the crate, we’ve securely packaged the Ares™ in multiple boxes to allow just a single person to bring it into their garage, basement, or gym. We are shipping over 1,000lbs, and this is the most secure and protected way to ship the Ares™ to you.
-
How do I assemble the Ares™?
Here are links to the Assembly Instructions and video:
-
What if I already own the Lat/Low Row Attachment?
Currently, the Ares™ system completely replaces our current plate-loaded lat pull-down and low row attachment with a selectorized lat pull-down and low row and functional trainer system all in one. (“Selectorized” refers to your ability to select the desired weight with a pin.) We are developing other options that integrate with the plate-loaded Lat/Low Row Attachment that will allow you to add the functional trainer capabilities.
-
What exercises can I do on the Ares™?
The number of exercises you can perform is long, but just to name a few: curls, tricep pushdowns, cable flies, lateral leg raises, donkey kicks, lateral arm raises, rehab/prehab shoulder work, mid rows, wood chops, face pulls, belt squats with our attachment, seated cable flies, and since there are so many attachment points, it is easy to superset between exercises.
-
What else should I consider getting with my Ares™?
We would recommend purchasing additional Cable Attachments, as well as upgrading the Ares™ Weight Stack.
-
Is the Ares™ Cable Attachment compatible with the Compact Logo Plate Crossmember?
Yes, but you will need to remove the REP Logo Plate itself to install the Ares. This Logo Plate can be reattached to another crossmember of your choosing.
-
Can you use other cable attachments with the Ares™?
Yes, check out our Cable Attachments collection. Note: The head plate was designed to be light enough for users wanting to perform rehab motions like rotator cuff work. To keep the head plate from rising during weight adjustment, we recommend attachments on the front handles weighing less than 3.5lbs, or lightly press on the head plate while adjusting the pin if you're using a heavier attachment.
-
How much can I store on a Ball & Plate Storage Shelf?
The amount of bumper plates you can store depends on the size. You can store up to 13 45lb Competition Bumper Plates per shelf. When using 45lb REP Pinnacle Plates, you can store up to 12. When using the Black Bumper Plates, you can store up to 13. Each shelf can hold three medicine balls at a time. With slam balls you can store up to four REP 5-30lb Slam Balls or three REP 35-70lb Slam Balls per 41” shelf.
-
How many dumbbells can I store per 41” Dumbbell Storage Shelf?
You can fit pairs of 5lb-20lb, 25lb-35lb, 40lb-50lb, 55lb-65lb, 70lb-75lb, 80lb-85lb, 90-95lb, or 95-100lb dumbbells on a single 41” shelf. You can fit a full set of our 5-50lb dumbbells on three 41” dumbbell shelves. Rubber Coated Dumbbells are not compatible.
-
How many kettlebells can I store per 41” Flat Storage Shelf?
Each shelf has a usable area of 3.13 square feet. It will depend on the size of the kettlebells, and the orientation you choose to store them (single or staggered). You can stagger pairs of 8kg-18kg(6 pairs), pairs of 10kg-20kg(6 pairs), pairs of 16kg-22kg(4 pairs), pairs of 20kg-24kg(3 pairs), pairs of 22-28kg(3 pairs), pairs of 24-32kg(3 pairs), pairs of 36kg-40kg(2 pairs), or pairs of 44kg-48kg(2 Pairs) of Kettlebells (kg) on a single shelf.
-
What is the weight capacity for each of the storage shelves?
The Dumbbell Storage Shelf, Kettlebell Storage Shelf, and Ball & Plate Storage Shelf have a weight capacity of 600lbs.
-
How high can I place my Dumbbell Storage Shelf?
We do not recommend installing them any higher than 60”.
-
How much width is added to my rack with the Off-rack Storage?
The 41" shelves plus additional upright will add 46" in width per side.
-
How much width is added to my rack with the Wing Add-on?
The 41" shelves plus additional uprights will add 63.3" in width per side.